Press Feeding Line(3 in 1 Feeder for steel coils)
I.Press Feeding Line-Feeding feature by PLC program from MITSUBISHI
1.NC Servo feeding. Operating with Computerize Numerical Control by PLC program from MITSUBISHI made in Japan. The electrical parts from YASKAWA made in Japan including Servo motor, driver, encoder, interface screen and so on.
2.High precision feeding: to meet the coming of hi-tech industry, controlled by computer closed circuit feedback system to keep precision degree within +/ -0.15mm
3.Feeding function: input 20 sets of different feed length, each group provides 999 times for punching or cutting to satisfy processing of special products.
4.High efficiency release device, match with adjustment of signal from the cutter or press machine through cable wire.
5.Setting of feed length: directly input feed length on the control plate, and then it can reach needed distance, feed length max 9999.99mm. speed max 100m/min
II. Press Feeding Line-Straightening feature: 1.3 in 1 uncoiler and straightener saves space and increase productivity.
2. Straightener and thickness adjustment by 4 worm gear micro-adjuster withreading 0.1mm advance reference indicator.
3.Feed and straightener roll with a hard chrome plated.
4.High rigid mechanical design sturdy construction, and high power output to secure proper straightening and feeding during the speed increasing efficiency.
5.Electric loop control system.
6.Power hold down arm device
7.Inverse curve roll, easy to set up the curve up or down of feeding exit direction.
8.Feeding line easily adjusted by worm gear screw Jacks device

advance
III.Press Feeding Line-Specification:
Item/Model | TNCF3-300 | TNCF3-400 | TNCF3-500 | TNCF3-600 | TNCF3-700 | TNCF3-800 | TNCF 3-1000 |
Width of Material(mm) | 75-300 | 75-400 | 75-500 | 75-600 | 75-700 | 75-800 | 75-1000 |
Thickness of Material(mm) | 0.4 - 3.2 |
Max.coil Weight(kg) | 2T(重量可定制) | 3T(重量可定制) | 5T(重量可定制) |
Coil L.D.(mm) | 508 |
Max.Coil O.D.(mm) | 1200 |
Max.Speed(m/min) | 16 |
Feed Pitch Accuracy(mm) | ±0.15 |
Feed ROLL | 上Upper1 / 下Lower1 |
Straighten ROLL | 上Upper5 / 下Lower4 | 上Upper4 / 下Lower3 |
Voltage | 380VAC / 60Hz |
Air power supply | 5kg / CM² |
Uncoiler Expansion | 油 压 Hydraulic |
Servo Motor(kw) | AC1.8(配伺服减速机) | AC2.9(配伺服减速机) | AC4.4(配伺服减速机) |
Uncoiler Motor(kw) | 1.5 KW | 2.2 KW |
Coil Car | 选 配 optional |
Pass line | ±100 MM |
IV.Press Feeding Line-Straightener performance:
Model/Width/Thickness | 0.3 | 1.0 | 1.2 | 1.6 | 2 | 2.4 | 2.8 | 3.2 |
TNCF3-300 | 300 | 250 | 220 | 180 |
TNCF3-400 | 400 | 250 | 220 | 180 |
TNCF3-500 | 500 | 400 | 280 | 220 | 180 |
TNCF3-600 | 600 | 500 | 400 | 280 | 220 | 180 |
TNCF3-700 | 700 | 550 | 400 | 280 | 220 | 180 |
TNCF3-800 | 800 | 600 | 400 | 280 | 220 | 180 |
TNCF3-1000 | 1000 | 800 | 600 | 400 | 280 | 220 | 180 |
Thank you for your inquiry about straightener feeder and decoiler, but you have to provide your main material parameter, so I can't quote for you,Please provide detailed material parameters, such as
1, coil thickness (mm)
2, coil width (mm)
3, MAX coil weight (kg)
4, the main material
More discount waiting for you!
Best regards
